1. The heat medium for this series of heat exchangers uses steam or high/low temperature hot water. Please specify the type of heat medium when designing and selecting.

2. The inner tube materials of this series of heat exchangers are selected from 304 stainless steel and copper tubes, while the outer shell materials include carbon steel and lined stainless steel, all stainless steel.

3. The outlet temperature of the heated water must not exceed 75°C. In actual use, to delay scaling, the outlet temperature of the heated water should be controlled between 50-60°C.

4. The bottom of the heat exchange tube bundle is close to the bottom of the tank. With the effect of the flow guide device, the cold water stagnation inside the tank is basically eliminated, achieving a volume utilization rate of 100%.

Applicable Scenarios: This series of heat exchangers is widely used for hot water supply in general industrial and civil buildings, such as hotels, schools, staff dormitories, nursing homes, high-rise buildings, gymnasiums, residential areas, and other industrial water supply units. Compared to other similar heat exchangers, it offers advantages such as small footprint, energy saving, and reliable operation.

Positive displacement heat exchangers are suitable for hot water supply systems in general industrial and civil buildings,

Material: The casing is made of carbon steel or stainless steel, with an exterior wall coated with blended paint for corrosion protection, and the inner wall can be treated with stainless steel lining as required by the user

Tube bundle materials: thin-walled stainless steel seamless pipes, T2 copper tubes.

Advantages: sufficient heat exchange, no cold water zone, minimal heat dissipation loss, high volume utilization, safe and stable water supply, and low housing temperature.