Customized square fully welded steam plate heat exchanger, thermal oil heat exchanger, industrial boiler cooling, direct supply from manufacturer

Product Overview
The square fully welded heat exchanger belongs to the category of plate-type heat exchangers. The structure of the heat exchanger is such that channels are formed between adjacent plates through welding, and two different temperature media flow through the channels on either side of the same plate. Each medium channel is controlled in terms of flow area and flow length by layered baffles, allowing the high-temperature fluid to transfer heat to the low-temperature fluid through the plates, thereby achieving the purpose of heat exchange.

CategoryFeatureDescription
Structural FeaturesHigh Heat Transfer EfficiencyThe plates adopt a herringbone structure, resulting in high heat transfer efficiency.
Low Liquid HoldupHigh turbulence on the plate surface and within the fluid channel results in a low degree of fouling on the plates and low liquid holdup.
Simple StructureThe product frame adopts a carbon steel structure, and the overall structure is relatively simple.
Reduced Material CostThrough the structural design of the plate edges, the parts in contact with the medium are made of the same material as the plates. This greatly reduces the equipment’s material cost and initial investment while adapting to the heat exchange needs of various media.
Detachable for CleaningIn the event of plate blockage in the square fully-welded heat exchanger, the surrounding cover plates can be removed for cleaning.

Description

Product attributes

Custom processingYesGoods numberZZ001
TypePlate heat exchangerCross-sectional area of the runner0.1-3.0(m2)
Weight50(kg)PurposeWaste heat recovery, heat exchange, and refrigeration
Heat transfer methodPartition Wall Heat ExchangerWhether cross-border export is exclusively supplied by the sourceYes

Partial Model Parameters Overview Table

ModelMax Length (mm)Width (mm)Height (mm)Max Assembly Area (m²)Max Nozzle Diameter on Hot Side (mm)Max Nozzle Diameter on Cold Side (mm)
PQ069602629109DNL50DN80
PQL81050367142532DN200DN80
PQ302750427166490DN250DNL25
PQ4028004501974120DN250DNL00
PQ6029005112186180DN350DN200
PQ9031007182560450DN500DN300
PQLL033007182860550DN500DN300
PQL3035007183160650DN500DN300

Design Parameters
Flow Range: 1~2000 M³/H
Working Pressure: Vacuum~8.2 MPa
Operating Temperature: -195~300°C
Service Life.
Interface Size: DN25~DN300
Connection Types: Welding, flange, threading, etc.
Corrosion Resistance: Welded seal without rubber gaskets, choice of various metals and alloys, providing corrosion resistance and longer service life.

Design Features
The square fully welded heat exchanger combines the advantages of plate heat exchangers and shell-and-tube heat exchangers. It retains the advantages of traditional plate heat exchangers such as high efficiency, compact structure, high-temperature resistance, good sealing performance, and quality assurance, while also being usable under higher pressure and temperature conditions. It is suitable for working conditions like steam condensation and liquid-to-liquid heat exchange, and meets the heat exchange needs of special media in industries such as power, petrochemical, coking, pharmaceutical, metallurgy, refrigeration, and pulp and paper. Through reasonable process configuration, it ensures a balanced match between heat transfer efficiency and resistance loss. The shell features a six-sided removable structure, also meeting process requirements for mechanical and chemical cleaning inside the equipment.

Reviews

There are no reviews yet.

Be the first to review “Customized square fully welded steam plate heat exchanger, thermal oil heat exchanger, industrial boiler cooling, direct supply from manufacturer”

Your email address will not be published. Required fields are marked *